MyAdvantech Registration

MyAdvantech is a personalized portal for Advantech customers. By becoming an Advantech member, you can receive latest product news, webinar invitations and special eStore offers.

Sign up today to get 24/7 quick access to your account information.

PCI-1274
Basic Motion Control Card with Multi Latch/Compare Trigger Function

  • Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
  • Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  • Support velocity motion
  • Supports speed override
  • Supports T/S-curve and programmable acceleration/deceleration rate
  • Support 16 Home modes
  • Support programmable interrupt
  • Latch and Compare max. frequency up to 1kHz
  • PCI-1274-12AE support 12-ch latch and 12-ch Compare function
  • PCI-1274-16AE support 16-ch latch and 16-ch Compare function
The PCI-1274 is a basic motion control PCI card with multi-latch/compare trigger function. PCI-1274 utilizes the high-performance FPGA to provide Point-to-Point, Latch and Compare Trigger with a SoftMotion algorithm inside to perform precise position control. PCI-1274 also has internal FIFO to enable high speed position compare and trigger pulse output. Users can link compare trigger outputs to latch inputs one by one, or link all compare trigger outputs to single channel of latch input only. Integrating a camera and sensor realizes AOI applications such as linear screw, and IC and vision inspection sorting machine. In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming workload, helping users complete configuration and diagnosis easily.

Product Specifications Download Spec

  • Part Number
  • Details
Counter/Encoder Input
  • Counting Range
Encoder Type and Interface
  • Counts per Enc. Cycle
  • Input Range
  • Input Type
  • Max. Input Frequency
Frequency
  • Signal Input
General
  • Connectors
  • Humidity (Operating)
  • Humidity (Storage)
Local I/O
  • General Input Signal
  • General Output Signal
Pulse Type Motion Control
  • Interpolation
  • Max. Output Speed
  • Motor Driver Support
  • Pulse Output Type
  • Step Count Range
  • Velocity Profiles

Counter/Encoder Input

  • Counting Range

    PCI-1274-12AE 32-bit

Encoder Type and Interface

  • Counts per Enc. Cycle

    PCI-1274-12AE x1, x2, x4 (A/B phase only)
  • Input Range

    PCI-1274-12AE 0~1 VDC for low; 3.5~5 VDC for high
  • Input Type

    PCI-1274-12AE Quadrature (A/B phase) or up/down
  • Max. Input Frequency

    PCI-1274-12AE 10 MHz under x4 A/B phase mode

Frequency

  • Signal Input

    PCI-1274-12AE Logic level 1: 10~30 VDC
    Logic level 0: 0~3 VDC

General

  • Connectors

    PCI-1274-12AE 1 x 100-pin SCSI female connector
  • Humidity (Operating)

    PCI-1274-12AE 5~95% RH (non-condensing)
  • Humidity (Storage)

    PCI-1274-12AE 5~95% RH (non-condensing)

Local I/O

  • General Input Signal

    PCI-1274-12AE Input voltage: 24 VDC Max.
    Input delay: 100 us Max. (isolation delay)
    Signal:
    EMG (emergency stop)
    ORG, LMT+, LMT-
    INPOS (in position signal)
    LTC (counter latch)
    RDY (servo ready)
    ALARM (servo alarm)
  • General Output Signal

    PCI-1274-12AE Output voltage: Open collect 24 VDC Max
    Output delay: 100 us Max. (isolation delay)
    Sink current: 100 mA per channel
    Signal:
    CMP (position compare in range output)
    SVON (servo on)
    RALM (reset driver alarm)
    ERC (counter clear signal)

Pulse Type Motion Control

  • Interpolation

    PCI-1274-12AE 2-axis linear interpolation
  • Max. Output Speed

    PCI-1274-12AE 1 Mbps
  • Motor Driver Support

    PCI-1274-12AE Pulse-type servo/stepping
  • Pulse Output Type

    PCI-1274-12AE Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
  • Step Count Range

    PCI-1274-12AE ±2, 147, 483, 646
  • Velocity Profiles

    PCI-1274-12AE T-Curve, S-Curve

Need more info? Talk to our Online Rep!